Auxiliary trigger connector allows the high beam switch easily routed inside of handle-bar. Reduces the complexity of bicycle assembly and lowers the associated costs while simplifying follow-up maintenance.

Easy power connector

This is an adding function for the light easily and quickly connected to motor system with FE cable solution. Reduce unnecessary redundancy complicated and inaccessible wiring can cause difficulties for mechanics.

Automatic emergency brake light is a feature that can sense slow or stopped traffic ahead and urgently apply the brakes if the driver fails to respond. Warns the rider/ driver of a hard braking event in front, even when the driver’s view is obstructed by other vehicles or bad weather conditions. In addition, it enables a vehicle to broadcast a self-generated emergency brake event to surrounding vehicles.

Automatic light sensor-is to sense the amount of ambient light present and auto adjust the light output. The function of ALS distinguishes whether your bike is approaching a tunnel or dark area, auto adjust the brightness. It also saves battery consumption.

Dual-light function: High and low-beam

Riders can simply switch between high and low beam. This function allows riders to easily adapt in various scenes.

Ingress Protection rating that classifies the degrees of protection.

This label includes two digits. The first digit, ranging from 0 to 6, indicates the level of dust resistance. The second digit, ranging from 0 to 9, indicates the level of liquid resistance. Higher the number signify better protection.

Lux: Light output

Lux measures the light on a surface, expressed numerically. For example, a dark alley might have 15 lux, while a work environment ranges from 150 to 500 lux. Higher numbers indicate greater brightness.


Lumen Measurement

Lumens (lm) are the units of luminous flux, which describe the total amount of visible light emitted by a light source. Lighting products use “lumens” to denote brightness, abbreviated as “lm.” The higher the lumens, the brighter the light source.


Input Voltage range.

Before plug-in, please check the input voltage range indicated on your product to ensure it matches the product range.

Electrically Power Assisted Cycle (EPAC)- 25km

A product with this label indicates that it is suitable for EPAC with a maximum speed of 25km/h.

Speed Pedelec-45km

A product with this label indicates that it is suitable for the speed pedelec with a maximum speed of 45km/h.

Complies with UN/ECE Regulations

Complies with German Road Traffic Licensing Regulations